Frequently Asked Questions

Swarakshit is engineered specifically to detect combustible gases like LPG (cylinder gas) and PNG/CNG (piped natural gas). Its highly calibrated sensors will trigger long before these gases reach explosive levels. Please note: it does not detect smoke or carbon monoxide (CO). It is designed to prevent gas leak disasters.

Installation takes less than 2 minutes and requires zero technical expertise. It comes with a simple wall-mount bracket and double-sided adhesive. Just stick it to the wall near your gas cylinder or stove, plug it into a standard power outlet, and it begins monitoring immediately.

Yes! Safety should never take a break. Swarakshit features a robust built-in rechargeable battery backup that keeps the device monitoring your kitchen for up to 8–10 hours even during complete grid blackouts.

Swarakshit connects seamlessly to your home Wi-Fi. Once linked to your network, if a leak is detected, the device will sound a piercing 85dB localized alarm while simultaneously pushing a high-priority notification directly to your devices—wherever you are in the world.

For optimal performance with LPG (which is heavier than air), install the detector low on the wall, about 1 foot above the floor and within 1-2 meters of your gas cylinder or stove. If using PNG (lighter than air), mount it higher up, about 1 foot below the ceiling.

The internal battery provides 8–10 hours of continuous backup monitoring during a power cut. It charges automatically while plugged in, so it's always ready when you need it.

Yes! Every Swarakshit detector comes with a comprehensive 1-year manufacturer's warranty against defects. We also offer a 30-day return policy if you aren't completely satisfied with your purchase.

If you get a new router or change your Wi-Fi password, simply reset the device's Wi-Fi settings using the reset button on the unit and follow the 60-second pairing process to connect it to your new network.